Operation
60
Cleaning the steam oven
Risk of injury caused by hot wa-
ter.
At the end of a steam cooking pro-
gramme, hot water left in the steam
generator is pumped back into the
water container.
Take care not to tip the water con-
tainer when taking it out of the appli-
ance.
Remove the water container as re-
quired.
Remove the spill guard and empty
the water container.
After each use, clean and dry the
whole steam oven as described in
“Cleaning and care”.
Make sure the spill guard engages
correctly when installing it.
Leave the appliance door open until
the oven compartment is completely
dry.
Refilling the water
If water needs replenishing during the
programme, a tone will sound and the
display will prompt you to refill the con-
tainer with fresh water.
Take out the water container and re-
plenish the water.
Push the water container into the ap-
pliance.
The cooking programme is resumed.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can use the sensor control to
change the values or settings for this
programme.
Select the sensor control.
Depending on the function, the follow-
ing settings appear:
– Temperature
– Power level
– Duration
Changing values and settings
Select the desired value or setting
and confirm withOK.
Change the value or setting and con-
firm withOK.
The cooking programme will restart with
the new values and settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
