en-CA - Warning and Safety instructions
37
Technical safety
The vacuum cleaner operates at 25.2V/25.69V.
It is classified as a class III appliance .
This appliance is supplied by a safety extra-low voltage
(SELV) power source where the voltage is low enough to
protect users from the risk of electrical shock. A Class II
charger is used for supplying power to charge the vacuum
cleaner .
Compare the connection data on the data plate of the
charger (voltage and frequency) with that of the electricity
supply. This data must match exactly. Without
modifications, the charger is suitable for 50Hz and 60Hz.
The electrical outlet must be fitted with a 16A or 10A
slow-blow fuse.
Check both the vacuum cleaner and all accessories
supplied with it for any visible signs of damage before use.
Do not use a damaged vacuum cleaner or damaged
accessory.
The MieleMultiFloorelectrobrush and the MieleElectro
Compacthandheldbrush (depending on the model) are
additional motor-driven devices designed specially for this
Miele vacuum cleaner. For safety reasons, the vacuum
cleaner must not be used with a different
Mieleelectrobrush/handheld brush or an
electrobrush/handheld brush produced by another
manufacturer.
To Next Page
Loading...
Need help?
General
