en-CA
51
Useful tip: The suction tube is not a
convenient option for cleaning carpeted
stairs.
Useful tip: If you ever need to vacuum
up substantial amounts of coarse dirt or
debris, use the PowerUnit Solo design
concept (see “Operation” – “Using the
PowerUnit Solo”).
Electro Compact handheld brush (HX-
EC20) (Fig. 21)
(depending on model)
Follow the flooring manufacturer’s
cleaning and care instructions.
Damage caused by trapped
material.
Risk of the flooring getting scratched.
Make sure that there is no coarse dirt
or debris trapped in the bottom of
the handheld brush, e.g. shards or
stones.
The handheld brush is particularly
suitable for intensive cleaning of
upholstery and car seats.
For optimum cleaning results on
upholstery, use the upholstery nozzle.
Useful tip: The suction tube is not a
convenient option for cleaning
upholstery or car seats.
AllFloor floorbrush (HX-AF20)
(Fig. 22)
(depending on country)
Follow the flooring manufacturer’s
cleaning and care instructions.
This flat and light floorbrush is
particularly suitable for cleaning
underneath very low furniture.
Universal brush (HX-UB) (Fig. 23)
(depending on model)
For gentle vacuuming of books, shelves,
or similar.
Extendable flexible XL crevice nozzle
(HX-CNXL) (Fig. 24)
(depending on model)
Can reach 60cm for cleaning hard-to-
reach areas.
Hose extension (HX-FSH20) (Fig. 25)
(depending on model)
The hose extension can be extended to
a maximum length of 120cm. It can be
extended further using the extendable
flexible crevice nozzle.
Operation
Removing the vacuum cleaner from
the standard wall bracket (Fig. 26)
Remove the vacuum cleaner from the
wall bracket by pulling it upward.
Removing the vacuum cleaner from
the SpeedLock wall bracket
(Figs.27+28)
Remove the vacuum cleaner from the
wall bracket by pulling it forward (Fig.
27).
The SpeedLock wall bracket offers the
option of using the PowerUnit
conveniently as a PowerUnit Solo,
without having to release it manually
from the suction tube.
Pull the PowerUnit upward out of the
wall bracket guide (Fig. 28).
The suction tube and the electrobrush
stay in the wall bracket.