Time display (19)
The time left for a programme to run
shows in the display in hours and
minutes as the programme progresses.
the "Time left" indicator light is on.
The time displayed in the time display
may vary with the same programme.
This is partly dependent on the tem-
perature of the inlet water on each oc-
casion.
When the dishwasher is first switched
on the display shows a time value for
an inlet water temperature of approx.
15 °C, (test temperature set in the fac-
tory).
With subsequent programmes the elec-
tronic unit takes account of the new
conditions and calculates the time re-
quired. This figure is then displayed
when the machine is next switched on.
End of a programme
A programme has finished when no in-
dicator lights are illuminated in the pro-
gramme sequence display (15) and a
"0" shows in the time display.
The indicator lights for the selected pro-
gramme just finished and any addi-
tional options which were chosen are
still lit up. These will go out when the
dishwasher door is opened.
The dishwasher can be opened and
crockery unloaded (see Section on un-
loading).
If it is left closed, the fan will continue
for a few more minutes to diminish any
remaining moisture.
This is recommended if the crockery is
not required immediately.
Switching off
At the end of a programme:
Press and release the "On-Off -
switch (16).
If the dishwasher is not to be used for a
long period of time, e.g. whilst on holi-
day:
Turn off the stopcock.
Switching on and off
37
To Next Page
Loading...
Need help?
General
