Turning on
^
Close the door.
^
Press the I-0button.
If the program selector is in the f
position, an indicator light will appear in
the display.
Starting a program
^ Turn the program selector clockwise
or counterclockwise to the desired
program. Refer to the "Program
Guide" for more details.
The display shows the "Main Wash 1"
temperature of the selected program
(except for "Rinse" and "Drain"). The
"Start" indicator flashes.
Selecting the (optional) drying
function
The additional function "Drying" can be
selected immediately after a program
has been selected (except for "Rinse"
and "Drain").
^ Press the "Drying" 0 button.
The options Drying 1 (if available) and
Drying 2 will now be added - see the
Program Guide for details.
The selected Drying 2 time appears in
the display. The drying time can be
changed in 5-minute increments, using
the 0 button.
Once the program has started the
changed drying time for the selected
program is stored. The total duration of
the program adjusts accordingly.
^
Press the "Start" 6 button.
The display shows the current
temperature.
The "Start" indicator comes on.
Use
30
To Next Page
Loading...
Need help?
General
