The following guide can be used to help address minor problems without a
service call.
,
Repairs should only be performed by Miele Technical Service. Work
performed by unqualified persons can place the user at considerable risk of
harm.
To help avoid unnecessary service calls, please be sure to check first whether an
error message is due to operator error.
To do so:
^
Turn the program selector to f. The error message is erased.
^
Press the On-Off button to switch off the machine.
^ Turn the machine back on and re-start the program.
^ If the error occurs again and cannot be corrected, contact Miele Technical
Service for assistance.
^ You will need to provide the error code ( "F...") .
What if... Possible fault Solution
The washer will not
start.
The door is not properly
closed.
Close the door firmly.
The machine is not
plugged in.
Plug in the power cord.
The fuses are defective or
the circuit breaker has
tripped.
Make sure the breaker has
not tripped.
The washer is not turned
on.
Press the On-Off button
and select a program.
The program does not
continue.
Error message: F 04 - F
17, F 20 - F 26, F 28 -
F - -
Contact Miele Technical
Service.
Fault code F 31 - 33 Dosing system faulty.
Contact Miele Technical
Service.
Frequently asked questions
54
To Next Page
Loading...
Need help?
General
