Changing program parameters
The factory settings for various
parameters are listed in the "Program
Guide".
Program parameters cannot be
changed unless they are activated
within a given program (see "Program
Guide".
It is important to document any
changes e.g., by recording them in the
corresponding column in the program
guide.
Changing the wash and rinse
parameters
The wash programs can be adjusted to
meet various technical requirements.
For example, the temperatures and
cycle times for the program blocks
Main Wash 1 and Main Wash 2, and
Rinse 1 and Rinse 2, can be changed.
Available temperature range:
30 °C - 93 °C in all programs except
"Rinse", "Drain" and "Special".
Available time range:
1 - 15 min.
Changing the drying parameters
The drying parameters within the
various wash programs can be
adjusted to meet specific requirements.
For example, the temperatures and
drying times within the program blocks
Drying 1 (if available) and 2 can be
changed.
Available temperature range:
50°C-99°C
Available drying time range for:
Drying 1: 1 - 99 min in 1 min
increments
Drying 2: 5 - 95 min in 5 min
increments
The drying time in the Drying 2
program block can also be changed
by using the 0 button (see
"Selecting the drying function").
Programming functions
40
To Next Page
Loading...
Need help?
General
