Programme options
52
Adjust Automatic
You can adjust the Automatic pro-
gramme so that it will remove stubborn
soiling from a lightly soiled load. This
will increase energy usage.
Switch the dishwasher off with the
button, if it is switched on.
Press the Start button in and whilst
holding it in switch the dishwasher
on using the button.
Keep the Start button pressed in for
at least four seconds until the Start
indicator light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Press the button five times.
The indicator will flash rapidly five
times at intervals.
The flashing sequence in the display in-
dicates whether Adjust Automatic is ac-
tivated or not.
– : "Adjust Automatic" activated
– : "Adjust Automatic" deactivated
Press the Start button to change the
setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
To Next Page
Loading...
Need help?
General
