Programme options
53
Memory
You can use the "Memory" option to
save the last programme used.
Instead of the ECO programme, the last
programme used will be selected when
the dishwasher is switched off and
back on again or the door is opened
and then closed at the end of a pro-
gramme.
Switch the dishwasher off with the
button, if it is switched on.
Press the Start button in and whilst
holding it in switch the dishwasher
on using the button.
Keep the Start button pressed in for
at least four seconds until the Start
indicator light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Press the button six times.
The indicator will flash rapidly six
times at intervals.
The flashing sequence in the display in-
dicates whether the "Memory" function
is activated or not.
– : "Memory" activated
– : "Memory" deactivated
Press the Start button to change the
setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
To Next Page
Loading...
Need help?
General
