Frequently asked questions
107
Problem Possible cause and solution
At the end of a program
there is a film of mois-
ture on the inside of the
door and possibly on
the interior cabinet
walls.
This is part of the normal function of the drying sys-
tem. The moisture will dissipate after a short time.
Water remains in the
wash cabinet at the end
of a program.
Before remedying the fault:
Turn off the dishwasher.
The filter combination in the wash cabinet is clogged.
Clean the filter combination (see “Cleaning the fil-
ters” under “Cleaning and care”).
The drain pump is blocked.
Clean the drain pump (see “Cleaning the drain
pump” under “Cleaning and care”).
The drain hose is kinked.
Remove any kinks from the drain hose.
Build-up of odors in the
wash cabinet
The frequent use of low-temperature wash programs
(<122°F/50°C) increases the risk of contamination
and odors inside the wash cabinet.
Regularly run a high-temperature program. This is
to prevent contamination and odors.
To Next Page
Loading...
