Cleaning and care
94
Cleaning the drain pump
If water remains in the wash cabinet
after the end of a program, the water
has not been pumped away. The drain
pump may be blocked by foreign
objects. These foreign objects are easy
to remove.
Disconnect the dishwasher from the
power supply.
To do this, turn off the dishwasher
and withdraw the plug.
Take the filter combination out of the
wash cabinet (see “Cleaning the
filters” under “Cleaning and care”).
Scoop the water out of the wash
cabinet using a small container.
Press the catch of the drain pump
cover inwards .
Tip the cover inwards until it is
released .
Rinse the cover thoroughly under
running water and remove all foreign
objects.
To Next Page
Loading...
Need help?
General
