Frequently Asked Questions
97
Fault messages
Problem Possible cause and solution
The in-operation
indicator light is
flashing quickly.
The alarm tone is
sounding.
One of the following
fault messages is
displayed:
Before remedying the fault:
Switch the dishwasher off.
Fault F: Technical fault.
Switch the appliance off and
back on again. Read the
Operating Instructions for
additional details.
There may be a technical fault.
Turn the dishwasher back on after a few seconds.
Select the program you want to use.
Close the door.
If the fault message appears again, there is a
technical fault.
Turn the dishwasher off.
Close the faucet.
Contact Miele Service.
Waterproof fault. Turn
the appliance off, close the
water supply and contact
Miele Service.
The Waterproof system has reacted.
Switch the dishwasher off.
Turn off the water supply.
Contact Miele Service.
Fault F 78: A technical
fault has occcurred. Turn off
the appliance, close the
water supply and contact
Miele Service.
Circulation pump fault.
Switch the dishwasher off.
Switch the dishwasher back on.
Select the desired program.
Close the door.
If the fault message appears again, there is a
technical fault.
Switch the dishwasher off.
Turn off the water supply.
Contact Miele Service.
To Next Page
Loading...
Need help?
General
