Miele G7966SCVI User Manual

Initial commissioning
30
Refilling the salt
 Fill the salt reservoir with reactivation
salt when Refill salt and start the
“QuickIntenseWash” program with the
“Express” option without a load appears
in the display.
 Confirm with OK.
The salt refill indicator will go out.
 Danger of corrosion due to saline
solution.
Salt solution that runs out can cause
corrosion in the wash cabinet and to
the wash items.
Each time you remove the salt
reservoir cap, you must run the
65°C QuickIntenseWash program
with the Express program option
selected without wash items in the
dishwasher. This will dissolve and
remove any traces of salt from the
wash cabinet.
After the salt reservoir has been filled,
the refill indicator may still appear in the
display if the salt concentration has not
yet reached the correct level. In this
case, still confirm the message again
with OK.
The salt refill indicator will be turned off
if you have programmed the dishwasher
for a water hardness below 5gr/gal
(5°dH).

Miele G7966SCVI Specifications

General

Built-in display	Yes
Display type	TFT
Inlet hose length	1.5 m
Outlet hose length	1.5 m
Place settings	16
Noise level	42 dB
Number of washing programs	10
Delayed start timer	Yes
Delayed start (max)	24 h
AquaStop function	Yes
Child lock	Yes
Water consumption per cycle	8.9 L
Power consumption (off)	0.3 W
AC input voltage	220-240 V
AC input frequency	50 Hz
Width	598 mm
Depth	570 mm
Height	805 mm
Appliance placement	Built-in
Product size	Full-size
Washing programs	Eco
Drying system	AutoOpen drying
Energy efficiency class	A
Connected load	2.1 kW
Programs	Automatic, ECO, Intensive, Normal, Quick wash
Special features	AutoOpen drying