Miele G7966SCVI User Manual

Frequently Asked Questions
100
Water drainage fault
Problem Possible cause and solution
The in-operation
indicator light is
flashing quickly.
The alarm tone is
sounding.
The following message
appears on the display:
Water was not pumped
away, see Operating
Instructions
Before remedying the fault:
 Switch the dishwasher off.
Water drainage fault.
There might be water in the wash cabinet.
 Clean the filter combination (see “Cleaning the
filters” under “Cleaning and care”).
 Clean the drain pump (see “Cleaning the drain
pump” under “Cleaning and care”).
 Remove any kink or loop in the drain hose.

Miele G7966SCVI Specifications

General

Built-in display	Yes
Display type	TFT
Inlet hose length	1.5 m
Outlet hose length	1.5 m
Place settings	16
Noise level	42 dB
Number of washing programs	10
Delayed start timer	Yes
Delayed start (max)	24 h
AquaStop function	Yes
Child lock	Yes
Water consumption per cycle	8.9 L
Power consumption (off)	0.3 W
AC input voltage	220-240 V
AC input frequency	50 Hz
Width	598 mm
Depth	570 mm
Height	805 mm
Appliance placement	Built-in
Product size	Full-size
Washing programs	Eco
Drying system	AutoOpen drying
Energy efficiency class	A
Connected load	2.1 kW
Programs	Automatic, ECO, Intensive, Normal, Quick wash
Special features	AutoOpen drying