Operation
72
Interrupting a program
A program will be interrupted as soon
as the door is opened.
After 4seconds, the message Press
“OK” to continue will appear on the
display.
Confirm with OK and close the door
within 4seconds.
The program will continue from the
point at which it was interrupted.
Risk of scalding due to hot
water.
During operation, water in the
dishwasher may be very hot.
During operation, only open the door
with extreme caution.
Cancelling or changing a
program
If a program is cancelled, important
program stages may be missed.
A program should only be cancelled
in the first few minutes.
If a program has already started and
you wish to cancel it, proceed as
follows:
Open the door.
Touch the Back sensor button.
Confirm the query with Yes.
The program will be cancelled.
If you would like to select another
program:
Touch the Back sensor button.
The display will change back to the
Programs menu.
If you have dispensed detergent
manually, check whether the
detergent compartment is still closed.
If the lid is already open, fill it with
detergent again and close the lid.
Select the program you want, and
then start it by shutting the door
within 4seconds.
The in-operation indicator light comes
on to show that a program has been
started.