Frequently Asked Questions
98
Door release
Problem Possible cause and solution
The in-operation
indicator light is
flashing quickly.
The alarm tone is
sounding.
The following fault is
indicated via the
display:
Before remedying the fault:
Switch the dishwasher off.
Door opening fault.
Switch the appliance off and
back on again. Read the
Operating Instructions for
additional details.
The door does not open automatically.
There may be a technical fault.
Open the door manually (see “Opening the door”
under “Before using for the first time”) and turn the
dishwasher back on again.
If the same fault message appears again, contact
Miele Service.
The door does not close automatically.
The door might be obstructed by an item inside the
appliance.
If this is the case, remove the item causing an
obstruction and turn the dishwasher on again.
If the same fault message appears again, contact
Miele Service.
To Next Page
Loading...
Need help?
General
