After the appliance has been con
-
nected to the power supply or after a
power cut "12:00" will appear in the dis
-
play. The colon will flash.
If the time of day is not then entered im
-
mediately, the time will start to run from
"12:00" onwards.
Setting time of day (24 hour
clock)
To enter or alter the time of day the
function selector must be set to "0".
^ Press the m touch control twice.
The facia text / symbol for "time of day"
lights up.
The colon lights up constantly.
^
Within the next 4 seconds use the "–
/+" touch control to enter or alter the
time of day.
When the colon starts flashing again
the new time is accepted, (ENTER or
START can also be pressed to confirm
the entry). If no new time is entered
within these 4 seconds, the clock re
-
verts to the previous time.
Turning off the time of day
display
^
Press the m touch control three
times.
The display area goes dark.
Showing time of day display
again
^ Press the m touch control twice.
The time of day display will reappear.
Time of day
27
2 x
2 x
To Next Page
Loading...
Need help?
General
