Selecting a function
^ Use the function selector to choose
the function you require:
See "Operating modes" and "Operation
– Controls".
Depending on model the following will
appear in the display:
–
MANUAL
for a "solo" or combination
programme.
–
h AUTOMATIC,
when an Automatic Programme is se
-
lected.
–
the selected function.
Selecting a microwave power
level / temperature
Each function has been assigned a
suggested power level (for the micro
-
wave) or a suggested temperature (for
traditional oven functions).
These will appear in the data entry dis
-
play.
Microwave
– Solo. . . . . . . . . . . . . . . . . . . . . . 600 W
– Combination programmes . . . . 300 W
Fan Heat . . . . . . . . . . . . . . . . . . . 160 °C
Auto Roast*. . . . . . . . . . . . . . . . . 160 °C
Grill . . . . . . . . . . . . . . . . . . . . . . . 220 °C
Fan Grill . . . . . . . . . . . . . . . . . . . 200 °C
* Continuation roasting temperature
Initial boosted temperature 230 °C
You can use the "– /+" touch control to
alter the microwave power level and the
temperature if those pre-set by the sys-
tem are not suitable.
When using the microwave function
you can chose from the following power
levels:
Solo:
80 W, 150 W, 300 W, 450 W, 600 W,
850 W, 1200 W.
Combination programmes:
80 W, 150 W, 300 W, 450 W.
Memory:
0 W, 80 W, 150 W, 300 W, 450 W,
600 W, 850 W, 1200 W.
Notes on use
28
To Next Page
Loading...
Need help?
General
