Before using for the first time
32
Before using for the first time
The oven must not be operated
until it has been correctly installed in
its housing unit.
Press and release the function and
temperature selectors if they are re-
tracted.
The time of day can only be changed
when the function selector is at0.
Set the time of day.
Setting the time of day for the
first time
The time of day is shown in the 24-hour
format.
After connecting the oven to the electri-
city supply, will flash on the dis-
play.
The time of day is set in segments: first
the hours, then the minutes.
Confirm withOK.
will light up and will flash.
While the symbol is flashing, con-
firm with OK.
The hours will flash.
Use or to set the hours.
Confirm withOK.
The hours are saved and the minutes
will flash.
Use or to set the minutes.
Confirm withOK.
The time of day is now saved.
The time of day can be displayed in
the 12-hour format by setting in
the settings menu to status(see
“Clock/timer – Changing settings”).
To Next Page
Loading...
Need help?
General
