Installation
-
I
N
-
S
T
A
L
L
-
A
-
T
I
O
N
-
83
Wiring diagram Cooker
Cookers with integrated hob controls
are not supplied with a connection
cable.
The cooker must be connected to the
mains supply using a type H05VV-F
mains cable only, with a suitable cross-
sectional area (CSA) according to the
diagrams shown.
Maximum connected load: see data
plate.
Possible combination hobs
Miele cookers with integrated hob con-
trols may only be combined with hobs
as specified by Miele for use with that
cooker.
Contact Miele or your Miele Dealer for
further information on suitable combin-
ations.
Oven
The wires in the mains lead are col-
oured as follows:
Green/yellow = earth
Blue = neutral
Brown = live
WARNING - THIS APPLIANCE
MUST BE EARTHED
For extra safety it is advisable to protect
the appliance with a suitable residual
current device (RCD).
Maximum connected load: see data
plate.
To Next Page
Loading...
Need help?
General
