Installation
-
I
N
-
S
T
A
L
L
-
A
-
T
I
O
N
-
80
Installing the cooker
Connect the cooker to the electrical
supply.
Place the cooker in front of the base
unit.
Insert the plug of the built-in hob into
the connection on the cooker.
Lifting the cooker by the door handle
could cause damage to the door.
Use the handle cut-outs on the side
of the housing to lift the appliance.
It is a good idea to remove the door
(see “Cleaning and care – Removing
the door”) and to remove the ac-
cessories before installing the appli-
ance. The cooker is then easier to
push into the cabinet carcase and you
do not run the risk of lifting it by the
door handle.
Push the cooker into the base unit
and align it.
Open the door, if you have not re-
moved it.
Secure the cooker to the side walls of
the cabinet carcase using the screws
supplied.
Refit the door if necessary (see
“Cleaning and care” – “Fitting the
door”).
To Next Page
Loading...
Need help?
General
