Temperature selector
The right-hand control V 6 W is used to
–
set the required temperature.
–
enter times (as an alternative to using the V or W sensor).
It can be turned clockwise or anti-clockwise.
The temperature selector can be retracted in any position.
Turn it clockwise to increase the value, turn it anti-clockwise to decrease the
value.
Sensors
The sensors under the display react to touch.
A keypad tone will sound each time a sensor is touched. You can deactivate this,
if wished (see "Settings %").
Use
OK – For calling up the functions in the display. Triangle V will appear in the
display.
– For confirming an entry.
V
W
– Moves triangle V in the display to the left or right.
– Decreases or increases the time entry.
– For selecting the Setting P and changing the Status S.
* For injecting a burst of steam manually.
N For entering a minute minder time, e.g. for boiling eggs.
The following will change each time the V or W is touched
–
Duration T and Finish time S in 1 minute increments,
–
Minute minder time N, at first in 5 second increments and then in 1 minute
increments.
Touching the sensor for longer, speeds up the change in the display.
Controls
17
To Next Page
Loading...
Need help?
General
