Before the oven can be used, you
will need to
– release the controls by pressing
them in, if they are pushed in
when the oven is delivered.
– set the time of day.
To set the time of day for the
first time
The time can only be entered when
the function selector is at "0".
In the display:
– the clock symbol m will light up,
– the time of day and triangle V will
flash underneath the m symbol.
I2:00
m
V
^
Use the temperature selector or the V
or W sensor to enter the hour first of
all.
^
Touch the OK sensor.
This confirms the hour and the minutes
will then start to flash.
^
Now use the temperature selector or
the V or W sensor to enter the
minutes.
^
Touch the OK sensor.
This confirms the minutes.
The time of day you have selected has
now been entered.
If there is a power cut, the appliance
will store the current time of day of
approx. 24 hours. If more than 24
hours have elapsed it will show "i2:00"
and will need to be reset.
When power is restored the time of day
will flash in the display. If it is correct
press the OK sensor to confirm it.
Changing the time of day
^
Touch the OK sensor twice.
^ Use the temperature selector or the V
or W sensor to enter the hour first of
all.
^ Touch the OK sensor.
^ Now use the temperature selector or
the V or W sensor to enter the
minutes.
^ Touch the OK sensor.
The time of day has been changed.
Before using for the first time
22
To Next Page
Loading...
Need help?
General
