The end of a cooking programme
At the end of the duration
–
the oven heating switches off
automatically.
–
the cooling fan will continue to run for
a while.
–
the S (Finish) symbol will start
flashing.
–
a buzzer will sound, if the buzzer is
switched on; see "Settings % – P2".
^
Turn the function selector to "0".
The buzzer will stop and the symbols in
the display will go out.
^ Remove the food from the oven.
To check and change an entered time
It is possible to check or change times
entered for a cooking programme at
any time by calling up the relevant
symbol with the V or W sensor.
To change the time, touch the OK
sensor and whilst triangle V is
flashing, change the entry with the
temperature selector or the V or W
sensor.
To delete an entered time
^
Set the duration to "0:00" or turn the
function selector to "0".
If there is a power cut, all data entered
will be deleted.
28
Operation
To Next Page
Loading...
Need help?
General
