To enter the basic settings
The oven will switch on automatically
when it is connected to the electricity
supply.
Welcome screen
A welcome screen will appear in the
display, and you will then be requested
to select some basic settings which are
needed before the appliance can be
used.
Follow the instructions in the display.
Setting the language
The welcome screen will be replaced
by the request to set a language:
^ Keep pressing the sensor to the right
of the arrows until the language
required appears in the display.
^ Touch the sensor to the left of the
language you want.
A tick L will appear beside the
language you have selected.
^
Confirm by touching the sensor next
to "OK".
Clock format
The request to select a Clock format will
appear. The default setting for the clock
is 24 h.
^
Touch the sensor to the left of the
clock format required.
A tick L will appear beside the clock
format you have selected.
^
Confirm with OK.
Setting the time of day
You will then be asked to enter the time
of day. The hour is highlighted.
^
Use the sensor next to
+ to enter the
hour, confirm with "OK" and then
enter the minutes in the same way.
Time display
You will then be asked when you want
the time of day to show in the display:
ß On
The time is always visible in the
display.
ß On for 60 seconds
The time is only ever visible for 60
seconds.
ß Do not display
The time only shows in the display
when the oven is being operated.
^ Touch the sensor to the left of the
setting you want.
After you have confirmed your selection
with "OK", the display will show
messages to tell you that:
–
your appliance is equipped for the
Miele|home system.
–
your appliance has been success
-
fully set up to use it for the first time.
As soon as you confirm this last
message with "OK", your appliance is
ready for use.
If you have selected the wrong
language by mistake proceed as
described in "Settings - Language"
to get back to the correct language.
Before using for the first time
26
To Next Page
Loading...
Need help?
General
Weight and Dimensions
