Problem solving guide
121
Problem Cause and remedy
The sensor controls or
the movement sensor
do not respond.
You have selected theDisplay| QuickTouch| Off setting.
When the oven is switched off, the sensor controls
and the movement sensor do not respond.
As soon as the oven is switched on, the sensor
controls and the movement sensor will respond. If
you want the sensor controls and the movement
sensor to respond even when the oven is switched
off, select the Display| QuickTouch| On setting.
The settings for the movement sensor are switched
off.
Change the settings for the movement sensor by
selecting Settings| Proximity sensor.
The movement sensor is defective.
Call the Miele Customer Service Department.
The oven is not connected to the power supply.
Check that the oven plug is correctly inserted into
the socket and switched on.
Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
If the display does not respond, there is a fault with
the controls.
Touch and hold the On/Off button until the
display switches off and the oven restarts.
System lock appears in
the display when the
oven is switched on.
The system lock has been activated.
You can deactivate the system lock for a cooking
programme by touching the symbol for at least
6seconds.
If you want to permanently deactivate the system
lock, select theSafety| System lock | Off setting.
Power cut -process
cancelled appears in the
display.
There has been a brief power cut. This has caused
the current cooking programme to stop.
Switch the oven off and then back on again.
Restart the cooking programme.
12:00 appears in the
display.
The power supply was interrupted for longer than
150hours.
Reset the time and date.