Settings
48
Safety
System lock
The system lock prevents the oven
being switched on by mistake.
You can still set an alarm and a minute
minder as well as use the MobileStart
function when the system lock is active.
The system lock will remain activated
even after a power failure.
– On
The system lock has been activated.
If you want to use the oven, switch it
on and touch the symbol for at
least 6seconds.
– Off
The system lock is deactivated. You
can use the oven as normal.
Sensor lock
The sensor lock prevents the cooking
programme being switched off by
mistake or settings being changed.
Apart from the On/Off sensor
control, the activated sensor lock
prevents the sensor controls and fields
in the display from working for a few
seconds after a programme has been
started.
– On
The sensor lock is active. TouchOK
for at least 6seconds to deactivate
the sensor lock for a short period of
time.
– Off
The sensor lock is deactivated. All
sensor controls react again to touch
as normal.
Furniture front recognition
– On
The furniture front detection is
activated. Using the movement
sensor, the oven automatically
detects whether the furniture door is
closed.
If the furniture door is closed, the
oven switches off automatically after
a certain period.
– Off
The furniture front detection is
deactivated. The oven does not
detect whether the furniture door is
closed.
If the oven is installed behind a
decorative furniture panel (e.g. a
door), the oven, housing unit and the
floor can be damaged by the build
up of heat and moisture behind the
closed furniture panel.
Always leave the furniture door open
when you are using the oven.
Leave the furniture door open until
the oven has cooled down
completely.
Tip: Turn off Furniture front recognition
if you want to use Sabbath mode.