Settings
45
Rapid cooling
Using the Rapid cooling function you can
quickly cool down food and the oven
compartment once the cooking process
is brought to an end.
This function is useful if, for example,
you then immediately want to start an
automatic programme for which the
oven compartment needs to be cold.
Using the Keeping warm function you
can keep food warm after cooking
without inadvertently cooking it further.
– On
The Rapid coolingfunction is switched
on. Once the cooking programme is
brought to an end, the door opens a
little automatically. The cooling fan
cools the food and the oven
compartment quickly.
– Off
The Rapid coolingfunction is switched
off. Once the cooking process is
brought to an end, the door remains
closed. The cooling fan cools the
food and the oven compartment.
You can also use the pull-down menu
to switch the Rapid coolingfunction on
or off for a cooking programme.
If your oven is installed behind a closed
furniture door, follow the instructions in
“Settings” – “Furniture front
recognition”.
Keeping warm
Using the Keeping warm function you
can keep food warm after cooking
without inadvertently cooking it further.
The food is kept warm at a pre-set
temperature for up to 2hours (Settings|
Recommended temps.| Keeping warm).
It is only possible to use the Keeping
warm function in combination with the
Rapid cooling function.
– On
The Keeping warmfunction is switched
on. Once the cooking programme is
brought to an end, the door opens a
little automatically. The cooling fan
cools the food and the oven
compartment quickly to the pre-set
temperature.
Once this temperature is reached, the
door is closed again automatically in
order to keep the food warm.
– Off
The Keeping warmfunction is switched
off. Once the cooking process is
brought to an end, the door remains
closed. The cooling fan cools the
food and the oven compartment.
You can also use the pull-down menu
to switch the Keeping warmfunction on
or off for a cooking programme.
If your oven is installed behind a closed
furniture door, follow the instructions in
“Settings” – “Furniture front
recognition”.