Settings
50
Remote control
If you have installed the Miele@mobile
app on your mobile device, have
access to the Miele@home system and
have activated the remote control
function (On), you can use the
MobileStart function to retrieve
information on oven cooking
programmes that are in progress or to
end a programme in progress.
Activating MobileStart
Select the sensor control to
activate MobileStart.
The sensor control lights up. You
can operate your oven remotely with the
Miele@mobile app.
Directly operating the oven via the
touch display takes priority over
operating it via the remote control
function on the app.
You can use MobileStart as long as
the sensor control is lit up.
SuperVision
The oven is a Miele@home-compatible
appliance with SuperVisionfunctionality
for monitoring other household
appliances in the Miele@home system.
The SuperVisionfunction cannot be
activated until the Miele@home system
has been set up.
SuperVision display
– On
The SuperVisionfunction is switched
on.
The symbol will appear in the top
right-hand side of the display.
– Off
The SuperVisionfunction is switched
off.
Display in standby
The SuperVisionfunction is also
available when the oven is in standby.
However, the time-of-day display must
be switched on (Settings| Time|
Display| On).
– On
Active household appliances that are
signed into the Miele@home system
are always displayed.
– Only if there is a fault
Only faults on active household
appliances are shown.