Energy saving tips
59
Residual heat utilisation
– In cooking programmes using
temperatures greater than 140°C
and with cooking durations longer
than 30minutes, the temperature can
be turned down to the lowest
possible level about 5minutes before
the end of the cooking programme.
The residual heat in the oven is
sufficient for cooking the food until it
is done. However, never switch the
oven off (see “Warning and safety
instructions”).
– If you have set a cooking duration for
a cooking programme, the oven
heating elements will switch off
automatically shortly before the end
of cooking. The residual heat in the
oven is sufficient to complete the
cooking process.
– It is best to start the pyrolytic
cleaning programme immediately
after a cooking programme. The
residual heat in the oven will help
reduce the amount of energy
required.
Settings
– Select the setting Display|
QuickTouch| Off for the control
elements in order to reduce energy
consumption.
– Select the Lighting| Off or "On" for 15
seconds setting for the oven interior
lighting. The oven interior lighting can
be switched on again at any time by
touching thesensor control.
Energy-saving mode
The oven will switch itself off
automatically to save energy if a
programme is not being run and
controls have not been operated. The
time of day will appear in the display or
the display will remain dark (see
“Settings”).