IMPORTANT SAFETY INSTRUCTIONS
7
ʊTo guarantee the electrical safety of this appliance, continuity
must exist between the appliance and an effective grounding
system. This appliance must be grounded. Connect only to properly
grounded outlet. See "Electrical connection - GROUNDING
INSTRUCTIONS". It is imperative that this basic safety requirement
be met. If there is any doubt, have the electrical system of the house
checked by a qualified electrician.
ʊBefore installation, make sure that the voltage and frequency
listed on the data plate correspond with the household electrical
supply. This data must correspond to prevent injury and machine
damage. Consult a qualified electrician if in doubt.
ʊBefore installation or service, disconnect the power supply to the
work area by
– removing the fuse,
– "tripping" the circuit breaker, or
– unplugging the unit. Pull the plug not the cord.
ʊExtension cords do not guarantee the required safety of the
appliance (e.g. danger of overheating). Do not use an extension cord
to connect this appliance to electricity.
ʊThe oven is not to be operated until it has been properly installed
within cabinetry.
ʊDanger of electric shock!
Under no circumstances open the outer casing of the appliance.
ʊThis appliance must not be used in a non-stationary location (e.g.
on a ship).
ʊDo not repair or replace any part of the appliance unless
specifically recommended in the operating instructions. All other
servicing should be referred to a qualified technician.
To Next Page
Loading...
Need help?
General
