Sensor lock
The sensor lock prevents the oven
being switched off by accident or
settings being altered whilst food is
cooking.
Once activated, the sensor lock
prevents the sensors working a few
seconds after a programme has been
started.
–
On
The sensor lock is active.
Press the OK sensor for at least
6 seconds to use the sensors again.
The sensor lock is then deactivated
for a short period.
– Off
The sensor lock is not active. All
sensors react to touch as normal.
Showroom programme
This function enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for
domestic use.
Demo mode
–
On
Touch the OK sensor for at least
4 seconds to activate demo mode.
If activated, the message "Demo
mode active. The appliance will not
heat up" will appear in the display
when the oven is switched on.
– Off
Touch the OK sensor for at least
4 seconds to deactivate demo mode.
The oven can then be used as
normal.
Factory default
–
Settings
Any settings that you have altered
will be reset to the factory default
setting.
–
User programmes
All user programmes will be deleted.
–
Recommended temperatures
Recommended temperatures which
have been changed will be reset to
the factory default settings.
Settings
45
To Next Page
Loading...
Need help?
General
