Miele HG06 User Manual

Programme options
49
Buzzer tones
A sequence of audible tones will sound
at the end o
f the programme or if there
is a fault.
The buzzer at the end of a programme
and w
arn
ing tones in the event of a
fault sound 4 times at intervals with a
short pause between each set of tones.
The buzzer tones are set to off ex-
works.
I
f you
want the buzzer to sound at the
end of a programme you will have to
set it. Buzzer tones for faults are always
active.
 Op
en the door.
 Switch the dishwasher off with the

butt
on, if it is sw
itched on.
 P
ress the programme selector button

in, and whilst holding it in switch
the dishwasher on using the  but‐
ton.
Keep the programme selector button
 pressed in for at least four sec‐
onds until the lower right hand pro‐
gramme indicator comes on.
If this does not happen, start the proce‐
d
ur
e from the beginning again.
 Press the Short button 4 times.
The
Shor
t indicator will flash rapidly 3
t
imes at intervals.
The flashing sequence in the display
shows w
h
ether the buzzer at the end of
the programme is activated or deactiva‐
ted.
–  : Buzzer tones switched on
–  : Buzzer t
ones switched off
 Press the programme selector button
 if you wish to change the setting.
The setting is now stored in memory.
 Switch the dishwasher off with the 
butt
on.

Miele HG06 Specifications

General

Brand	Miele
Model	HG06
Category	Dishwasher
Language	English