Programme options
53
Factory default
If you have altered any settings from
the factor
y default, you can re-set them
back to the factory default settings.
Op
en the door.
Switch the dishwasher off with the
button, if it is sw
itched on.
P
ress the programme selector button
in, and whilst holding it in switch
the dishwasher on using the but‐
ton.
Keep the programme selector button
pressed in for at least four sec‐
onds until the lower right hand pro‐
gramme indicator comes on.
If this does not happen, start the proce‐
d
ur
e from the beginning again.
Press the Short button 19 times.
The Shor
t indicator will do 1 long flash
and
9 short flashes at intervals.
The flashing sequence in the display in‐
d
ic
ates whether a setting has been
changed from its factory default.
– : All setting
s
are set to factory de‐
fault settings.
– : At least one setting has been
changed.
To reset the dishwasher to the factory
default setting
s, press the pro‐
gramme selector button .
The setting is now stored in memory.
Switch the dishwasher off with the
butt
on.
To Next Page
Loading...
Need help?
General
