Switching on and off
The I-0 "On-Off" button is used for
switching the ironer on and off.
To switch on
^ Press the I-0 button in
– The indicator light beside the button
will come on.
To switch off
^
Press and release the I-0 button
–
The indicator light beside the button
will go out.
Select the temperature for ironing
The temperature selector is used for
setting the ironing temperature.
The temperature settings are indicated
by dots around the selector. These dots
correspond to the international symbols
for ironing.
An adhesive label is supplied with the
appliance for the temperature selector.
Material Dot
symbol
Temperature
range
Minimum
iron /
Synthetics
ß Low
temperature
Woollens /
Silks
ßß Medium
temperature
Linen /
Cottons
ßßß High
temperature
I 40 - 60°C
^
Turn the temperature selector to the
temperature you wish to use.
–
The
o
C "Temperature" indicator light
will come on whilst the heater plate is
heating up.
It will go out when the required
temperature has been reached.
With mixed fibre textiles the
temperature should be set to suit the
most heat sensitive fibre in the fabric.
For example an item made from
poly-cotton should be ironed using the
ßß Woollens / Silks setting and not the
one for Cottons.
Ironing
13
To Next Page
Loading...
Need help?
General
