Feeding laundry in
^
Arrange laundry along the feed-in
table so that it is straight and smooth.
^ Then carefully turn the roller by hand
until the laundry makes contact with
the heater plate (keep your fingers
away from the heater plate).
^ Press the foot pedal down.
Hanging bar
Ironed laundry can be hung over the
swing out bar to avoid creasing.
,
Take care not to press down on
the bar when it is swung out. There
is a danger that this could tip the
ironer over.
Useful tips
If creases appear on items being
ironed:
Stop the roller and pull the item back
slightly. Smooth it out and if necessary
dampen it with a wet cloth.
Try to use the full width of the roller to
help the roller cover maintain its shape.
For small items, e.g. handkerchiefs,
alternate between using the right and
left hand sides of the roller.
Items with raised buttons should be
ironed face down on to the roller so that
they are pressed into the cushioned
surface.
A cloth should be placed over zips,
metal buttons and hooks to protect the
heater plate during ironing.
To protect the heater plate do not iron
very bulky or heat-sensitive buttons.
When you have nearly finished ironing,
you can set the temperature selector to
l and continue ironing small items at a
low temperature.
Ironing
15
To Next Page
Loading...
Need help?
General
