Repairs
In the event of any faults which you
cannot remedy yourself please contact
–
Your Miele dealer or
–
the Miele Service Department (see
back cover for contact details).
When contacting Miele, please quote
the Model and Serial number of your
appliance, both of which are given on
the data plate which is located at the
front underneath the ironing table.
a Model
b Serial number
c Voltage/Frequency
d Fuse rating (on-site)
e Connected load
The wiring diagram is located at the
front right hand side of the ironing table
behind the plastic cover.
N.B.: A call-out charge will be
applied for unnecessary service
visits where the problem could have
been rectified as described in this
instruction manual.
Please note that telephone calls may
be monitored and recorded for
training purposes.
After sales service
24
To Next Page
Loading...
Need help?
General
