Miele KF 1801 Vi User Manual

^
After the filter has been changed, the
reminder to change the filter will
continue to flash in the control panel.
Confirm that the filter has been
changed (see "To confirm the water
filter has been changed").
To confirm the water filter has
been changed
^ Touch and keep your finger on the
symbol that reminds you to change
the water filter.
^
Then place another finger on the
access sensor (without moving your
finger from the water filter symbol)
and leave both fingers there for
approx. 5 seconds until you hear a
tone.
The replacement of the water filter has
now been confirmed and the prompt to
remind you of the next water filter
change has been activated.
The reminder to change the filter will
now go out in the control panel.
^
Close the appliance door.
All ice cubes that are produced in
the 24 hours after you have
changed the water filter should be
discarded.
Using an external water filter
If you have already installed an external
water filter in your home, still leave the
water filter (bypass filter) in place that is
supplied with the appliance.
Water filter
60

Miele KF 1801 Vi Specifications

General

Child lock	-
Door hinge	Right
Control type	Sensor
Product color	Stainless steel
Reversible doors	Yes
Shelves material	Tempered glass
Door opening angle	115 °
Appliance placement	Built-in
Door panel included	No
Noise level	40 dB
Climate class	SN-T
Total net capacity	390 L
Total gross capacity	- L
Form factor	Upright
Fridge number of compressors	2
Star rating	4*
Freezer position	Bottom-placed
Freezing capacity	15 kg/24h
Freezer net capacity	80 L
Storage time during power failure	15 h
Fridge net capacity	253 L
Fridge number of shelves/baskets	4
Fresh zone compartment net capacity	57 L
Connected load	- W
Annual energy consumption	373 kWh

Weight and Dimensions

Depth	610 mm
Width	750 mm
Height	2127 mm