^
Carefully pull out the lid between the
compartments slightly, and lift it down
and out.
^
To replace it, insert the compartment
lid from beneath into the holders, and
push it back into place.
To replace the compartment,
^ place it back on the fully extended
runners a. The front of the runners
must be right up against the front of
the compartment b.
^ Then push the compartment back in
c.
Adjusting the condiment
tray/bottle shelf
^
Lift the tray/shelf up and out of the
stainless steel frame to remove.
^
Push up the stainless steel frame,
and remove.
^
Replace the frame at the required
height. Ensure that it is securely
pushed back into position.
^
Replace the tray/shelf in the frame.
The tray/shelf can be removed
completely and used as a serving tray
at the table.
Universal container
The universal container can be used
both to store and serve food.
It consists of a deep tray a and a
shallow tray b. Both trays fit the
stainless steel frame.
If you wish to use the universal
container to serve food,
^ place the shallow tray b in the
stainless steel frame, and use the
deep tray as a lid a.
You can lift the universal container,
including contents, out of the frame and
take it to the table.
Moving the bottle divider
(depending on model)
The bottle divider can be moved to the
left or right to ensure that bottles are
held securely in position when the door
is opened and shut.
The bottle divider can be removed
completely (e.g. for cleaning).
^
To do this, push up the front edge of
the bottle divider, and disengage it.
Adjusting the interior fittings
31
To Next Page
Loading...
Need help?
General
Weight and Dimensions
