Miele KF 9757 iD User Manual

All fitting instructions given are for a
right hand hinged appliance. If you
have converted the appliance to left
hand hinging you will need to adapt
these instructions accordingly.
Building into a peninsular run
When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Aligning the housing unit
The housing unit must be carefully
aligned using a spirit level before
installing the appliance. The unit
corners must be at right angles, as
otherwise the furniture door will not
align correctly with the 4 corners of the
appliance.
Preparing the appliance
^
Slide cover strip a into the holder as
shown, with the bumps facing
downwards. The bumps will fit into
keyhole slots b.
The cover strip is then flush with the
side of the appliance on which the
door is opened c.
^ Push the appliance three-quarters of
the way into the niche.
When doing this, make sure that the
mains cable does not get trapped.
Building in the appliance
54

Miele KF 9757 iD Specifications

General

Door hinge	Right
Product color	White
Reversible doors	Yes
Appliance placement	Built-in
Door panel included	No
Fridge number of compressors	1
Noise level	39 dB
Total net capacity	203 L
Total gross capacity	- L
Fridge number of shelves/baskets	5
Freezing capacity	10 kg/24h
Freezer net capacity	57 L
Freezer number of shelves/baskets	2
Storage time during power failure	20 h
Annual energy consumption	292 kWh

Weight and Dimensions

Depth	550 mm
Width	560 mm
Height	1772 mm