Miele PDR 507 EL User Manual

4. Selecting programme settings
32
Selecting Delay start
Delay start must be activated in the
Supervisor level for it to be able to be
selected. In this case, one of these 3
symbols will also
light up in the
display: , , .
 
Normal
Cottons
1:43
h

 Touch the sensor with the clock
symbol.
Depending on the Delay start settings in
the Supervisor level, different delays
can be selected in 15-minute
increments:
– The programme finish time: Finish
at
– The programme start time: Start at
– The time until the programme starts:
Start in
The maximum Delay start period is 24
hours. The left-hand side of the
display shows what you are able to
enter.
Start at


OK


15:

2
h
 Touch the  or sensor to select
the hours and/or minutes.
 Touch the OKsensor.
If the Delay start time is set to  Finish
at or  Start at, the current times will be
displayed.
 Touch the OKsensor.
Delay start begins when you start the
programme.
Changing/cancelling Delay start
Before the programme starts
 Touch the sensor with the clock
symbol.
 You can change or delete the time.
After the programme has started
 Touch the Start/Stop sensor.
 You can either cancel the programme
or start it straight away.

Miele PDR 507 EL Specifications

General

Brand	Miele
Model	PDR 507 EL
Category	Dryer
Language	English