Cleaning and care
45
Pull the filter out by its handle.
Dismantling the filter
Hold onto both handles on the filter.
Turn the inner part of the filter anti-
clockwise slightly until you feel it click
(1).
Pull apart the two parts of the filter
(2).
Cleaning the filter parts dry
Useful tip: The best cleaning result can
be achieved with a vacuum cleaner.
Use your fingers or a vacuum cleaner
to remove the fluff from the surface of
the filter.
Cleaning the filter parts with water
If there is a lot of compacted fluff on the
filter parts, you should also clean them
under warm running water.
Ensure the filter is dry before
replacing it. Damp or wet filters can
cause operational faults.
Shake both parts thoroughly and
then dry them carefully.
To Next Page
Loading...
Need help?
General