Problem solving guide
51
Message Possible cause and remedy
Fault F. If restart
fails, call Miele.
lights up after a
programme has
been cancelled.
There is no obvious cause.
Follow the prompt in the display.
Touch the OKsensor.
If the programme terminates again with the same
error message, then there is a fault. Contact Miele
Customer Service.
Obstruction
detected. Untangle
laundry and restart.
lights up after a
programme has
been cancelled.
The laundry is unevenly distributed or has rolled up.
Open the door and loosen the laundry. Take out
some of the laundry if necessary.
Close the door.
Start a programme.
Finish / Cooling down
lights up and the drying
process is not yet
finished.
This is not a fault. The laundry is still being cooled.
The programme is just about to end.
Either remove the laundry and spread it out to cool
down or leave it in the tumble dryer to cool down
during the cooling phase.
To Next Page
Loading...
Need help?
General