Miele PFD 104 SCVi User Manual

Settings
109
Volume
A sequence of warning tones will sound
at the end of the programme or if there
is a fault, provided that the signal tones
are activated.
Signal tones in the event of a fault
In the event of a fault, the alarm tone
will sound fourtimes at intervals with a
short pause between each set of tones.
The alarm tone that sounds when
there is a fault cannot be
deactivated.
Signal tones
The signal tones at the end of a
programme will sound fourtimes at
intervals with a short pause between
each tone.
The volume of the signal tones at the
end of the programme can be set to
one of seven different settings. If no
volume is selected, the signal tones are
switched off.
Keypad tone
An audible tone sounds each time a
sensor is pressed.
The volume for the keypad tone can be
set to one of seven different settings. If
no volume is selected, the keypad tone
is switched off (except for the On/
Offsensor).
Welcome melody
When you switch the dishwasher on or
off, a brief melody sounds.
You can switch this melody off.
Refill reminders
If you only ever use combination
detergent products or automatic
dispensing using Miele PowerDisks (if
available), you can switch off the refill
reminders for reactivation salt and rinse
aid if you wish.
Please make sure that if you stop
using combination detergents, you
refill the dishwasher salt and rinse
aid. Switch the refill reminders back
on.

Miele PFD 104 SCVi Specifications

General

Brand	Miele
Model	PFD 104 SCVi
Category	Dishwasher
Language	English