Commissioning
30
Adding rinse aid
Lift the yellow button on the lid of the
rinse aid container .
The lid will open.
Only add rinse aid until the fill level
indicator (see arrow) turns dark when
the door is open horizontally.
The rinse aid reservoir holds approx.
110ml.
Close the flap firmly so that it clicks
into place. Otherwise water can enter
the rinse aid reservoir during a
programme.
Wipe up any spilled rinse aid. This
prevents over-foaming occurring
during the next programme.
You can adjust the rinse aid dosage
for best results (see "Settings - Rinse
aid").
Refilling rinse aid
When the Refill rinse aid message
appears, the reservoir only contains
sufficient rinse aid for another 2–3
programmes.
Add rinse aid in good time.
Confirm with OK.
The refill rinse aid reminder will go out.
To Next Page
Loading...
Need help?
General
