Miele PFD 104 SCVi User Manual

Problem solving guide
82
Water intake fault
Problem Possible cause and remedy
The optical in-operation
indicator light is
flashing quickly.
The warning buzzer is
sounding.
One of the following
messages appears in
the display:
 Turn on tap
The tap is turned off.
 Turn on the tap fully.
 Water intake
Before rectifying the problem, you must:
 Switch the dishwasher off.
Water intake is restricted.
 Turn on the tap fully and start the programme
again.
 Clean the filter in the water inlet (see “Cleaning
and care – Cleaning the water inlet filter”).
 The water connection pressure is lower than
50kPa.
Seek professional advice.
 The on-site connection for the water drainage may
be too low and you will need to raise the water
drainage height (see “Installation – Hose position”).
 Fault F18
A technical fault has occurred.
 Switch the dishwasher off.
 Turn off the tap.
 Call Miele.

Miele PFD 104 SCVi Specifications

General

Brand	Miele
Model	PFD 104 SCVi
Category	Dishwasher
Language	English