EasyManuals Logo

Miele PG 8583 User Manual

Miele PG 8583
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #110 background imageLoading...
Page #110 background image
Program settings
110
Setting the con-
centration
Up to two process chemicals can be dispensed in each wash block.
It is also possible to control the same dispensing system twice.
...
Dosage 1 or Dosage 2
Dispensing system
Dispensing system
DOS 1 ...
DOS ...
The number of dispensing systems can vary according to model and
the number of connected DOS modules.
Select an option using the and arrow buttons and save your
choice with OK.
Then you can set the dispensing concentration in % (percent).
DOS
(0.05 - 2.00 %)
0.30 %
Adjustment is in increments of 0.01%. The possible range is shown in
the bottom line.
Use the arrow buttons (higher) and (lower) to set the dispens-
ing concentration.
Press OK to save the setting.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele PG 8583 and is the answer not in the manual?

Miele PG 8583 Specifications

General IconGeneral
CategoryLaboratory Equipment
ModelPG 8583
TypeLaboratory glassware washer
External dimensions, height835 mm
External dimensions, width600 mm
Usable chamber depth500 mm
Number of baskets2
Max temperature93°C
HeatingElectric
Water connectionCold and hot water
Electrical connection230V, 50Hz
Power supply230V, 50Hz

Related product manuals