Miele PG 8583 User Manual

Operation
54
Selecting a program
Program selection
buttons
 Select a programme using program selection buttons,,
or.
Program list
 Press the button and
 use the and arrow buttons to highlight a program and confirm
your selection with OK.
Normal plus
Temperature
Duration
h1:30
75 °C
The LED in the button selected lights up and the relevant program ap-
pears in the display. The LED in the Start/Stop button also starts to
flash.
Another program can be selected at any time before a program has
started. Once it has started, program selection is locked.
The different programs and their uses are described in “Program
charts” at the end of these operating instructions.
Always select the program depending on the type of wash items and
degree and type of soiling, or on infection prevention issues.
Starting a program
 Close the door.
When the door is closed, the LED in the button will light up.
 Press the Start/Stopbutton.
The LED in the Start/Stopbutton will light up constantly and the
LED in the button will go out.
Starting a pro-
gram using delay
start
The start of a program can be delayed (to benefit from economy rates
of electricity, for example, or to clean the wash cabinet before it is
used the next day). Starting from the programmed time, a delay start
time between 1minute and 24hours can be selected in one-minute
increments (see “Settings/Time of day”).
Delay start must be switched on (see “Settings/Delay start”).
If soiling is left to dry on the wash items for a long time, the repro-
cessing result can be adversely affected. There is also a risk of cor-
rosion for stainless steel wash items.

Miele PG 8583 Specifications

General

Brand	Miele
Model	PG 8583
Category	Laboratory Equipment
Language	English