Miele PG 8583 User Manual

Maintenance measures
121
Maintenance
The machine should be serviced every 1,000hours of operation, or
at least once a year, by Miele Customer Service or a suitably quali-
fied specialist.
Maintenance covers the following:
- Electrical safety according to national regulations
- Door mechanism and door seal
- Any screw connections and connectors in the wash cabinet
- Water inlet and drainage
- Internal and external dispensing systems
- Spray arms
- Filter combination
- Sump including drain pump and non-return valve
- All mobile units, baskets, modules and inserts
- Steam condenser
- Wash pressure sensor
- Drying unit
- Conductivity meter
If there is a communication module:
- Connected printer
- network connection
External documentation software and computer networks are not
tested by MieleService.
The following operational tests will be carried out within the frame-
work of the maintenance:
- A program will be run as a test run
- Seals will be tested for water tightness
- All relevant measuring systems will be safety tested, including fault
displays
- Safety features

Miele PG 8583 Specifications

General

Category	Laboratory Equipment
Model	PG 8583
Type	Laboratory glassware washer
External dimensions, height	835 mm
External dimensions, width	600 mm
Usable chamber depth	500 mm
Number of baskets	2
Max temperature	93°C
Heating	Electric
Water connection	Cold and hot water
Electrical connection	230V, 50Hz
Power supply	230V, 50Hz