Miele PG 8583 User Manual

Program settings
112
Setting the hold-
ing time
The holding time is the duration in which the wash block temperature
is kept constant.
...
Holding time
Holding time
)Min
(0 - 15
1 Min
The duration can be set in 1minute increments. The possible range is
shown in the bottom line.
If process chemicals are to be dispensed in this wash block, the hold-
ing time will equal at least the DOS exposure time. It is not possible
to set a lower value.
 Use the arrow buttons  (higher) and  (lower) to set the holding
time.
 Press OK to save the setting.

Miele PG 8583 Specifications

General

Category	Laboratory Equipment
Model	PG 8583
Type	Laboratory glassware washer
External dimensions, height	835 mm
External dimensions, width	600 mm
Usable chamber depth	500 mm
Number of baskets	2
Max temperature	93°C
Heating	Electric
Water connection	Cold and hot water
Electrical connection	230V, 50Hz
Power supply	230V, 50Hz